|
|
|
|
The PS1100A product is a slim-design, 48V, DIN rail
mounted Class I switching power supply featuring fully isolated plastic
cases, extended operating temperatures from -10° to 60°C and 88%
efficiency.
Standard features include short circuit, overload, and over voltage
protection, no load power consumption, and DC OK signal for monitoring
status of the power supply unit.
Hardware
- Enclosure UL Compliant fully isolated plastic
- Installation Method DIN rail (35MM)
- DIN Rail Spec TS35/7.5 or TS35/15
- LED Indicators Output voltage status
- Dimensions 3.9" x 2.2" x 3.5"
- Product Weight 0.9 lb
Input Specifications
- Connector Type Screw Terminals
- AC Voltage Range 85-264VAC
- Frequency Range 47-63Hz
- Power Factor (PF Typ.) ≥0.95/230VAC
≥0.98/115VAC - DC Voltage 120-370VDC
- Efficiency (Typ.) 88%
- AC Current (Typ.) 1.3A/115VAC
0.8A/230VAC - Cold Start Inrush Current 30A/115VAC
60A/230VAC - Leakage Current < 1mA/240VAC
- No Load Power Consumption < 1W
Output Specifications
- Connector Type Screw Terminals
- DC Voltage 48VDC
- Rated Current 2A
- Current Range 0-2A
- Rated Power 96W
- Voltage Adjustable Range 48 - 56VDC
- Voltage Tolerance ±1%
- Ripple and Noise (Max) 200mVp-p
- Output Load Derating 60% of full load at 60°C
- Line Regulation ±1%
- Load Regulation ±1%
- Set-Up, Rise Time 3000ms, 50ms/230VAC
3000ms, 30ms/115VAC - Hold Up Time (Typ.) 50ms/230VAC
20ms/115VAC at full load - DC OK Active Signal Relay Contact Rating: 30/1A
Protection Specifications
-
Short Circuit/Overload
- Overload Power 105-150% of rated power, 100W
- Overload Protection Type Constant current limiting. Recovers automatically after fault condition is removed.
-
Over Voltage
- Rated Voltage 57.6 - 64.8VDC
- Over Voltage Protection Type Shutdown output voltage, re-power on to recover
-
Over Temperature
- Rated Temperature 90°C ± 10°C detection on power transistor heat sink
- Over Temperature Protection Type Shutdown output voltage, re-power on to recover
Environmental Specifications
-
Air temperature
- System On -10 to 60° C
- System Off -40 to 85° C
-
Vibration
- Component 10-500Hz, 2G 10 min./1 cycle, 60 min. each along X, Y, Z axes
- Mounting Compliance to IEC60068-2-6
- Operating Humidity (non-condensing) 20% to 90%
- MTBF (Mean Time Between Failures)39.5 Years
Export Information
- Packaged Shipping Weightl.0 lb
- Package Dimensions4.5" x 2.5" x 4.1"
- UPC Code7-56727-32102-6
- ECCN 4A994
- Schedule B Number 8504.40.6007
Regulatory Approvals
|
|
|
|
|
|
|
|
|
|
|
|
|
Features
- Universal AC input
- Short circuit, overload, over voltage protection
- Air convection cooling
- DIN rail installation
- Built in DC OK active signal
- NEC class 2/ LPS compliant
- Power on LED indicator
- No load power consumption < 1W
- 100% full burn-in tested
|
|
|
|
|
|
|