|
|
|
|
The RocketLinx ES8510-XTE is a managed Industrial Ethernet Switch, equipped with seven 10/100Base-TX ports and three RJ45/SFP combo (10/100Base-TX, 100Base-FX) ports. The 3 combo ports offer flexibility for additional fiber connections by plugging in different types of SFP modules, which can support distances of 2KM in Multi-Mode or 120KM in Single-Mode. The combo ports make port combination even easier, such as 8 RJ ports and 2 fiber ports, or 9 RJ ports and 1 fiber port.
The RocketLinx ES8510-XTE is housed in a rugged aluminum enclosure that features an excellent heat dispersing mechanical design and wide operating temperature support. The embedded software supports full Layer 2 management features, multi-form ring redundancy, network control, monitoring, security and notification. The RocketLinx ES8510-XTE also provides a built-in watchdog timer, digital input and relay output to avoid undetected problems. With industry leading managment features and rugged industrial design, the RocketLinx ES8510-XTE provides the perfect foundation for building your industrial Ethernet infrastructure.
Three RJ45/SFP Fast Ethernet Combo Ports for Flexible Network Planning The RocketLinx ES8510-XTE is designed with three combo Fast Ethernet ports. Each combo port combines one Small Form-Factor Pluggable (SFP) socket for 100Mbps multi-mode or single-mode SFP transceiver, as well as one RJ45 copper port in 10Mbps full duplex, 100Mbps half /full duplex link mode. The switch will automatically detect the priority of cable connections for each combo port. Users are able to connect two 100Mbps SFP ports of the ES8510-XTE for Fast Ethernet Fiber Redundant Ring topologies and the third combo port as a fiber uplink port. 100Mbps SFP
The RocketLinx ES8510-XTE SFP socket supports 100Base-FX single/multi-mode transceivers. The available distance of the 100Base-FX ranges from 2KM multi-mode to 120KM with single mode modules.
DIN rail mounting bracket included.
Hardware
- Bus Interface Specification 10/100BASE-TX
100BASE-FX Fast Ethernet Fiber
- Enclosure IP31 Grade Aluminum
- Installation DIN Rail
- LED Indicators Power 1, Power 2, Ring Master (R.M.)
10/100BASE-TX Link/Activity 10/100BASE-TX Full-Duplex/Collision Copper/SFP Combo Link Activity Digital Input 1&2, Digital Output 1&2
- Dimensions 5.0" x 6.3" x 3.7"
- Product Weight 2.63 lb
Technology
- Standards IEEE 802.3 10BASE-T
IEEE 802.3u 100BASE-TX and 100BASE-FX IEEE 802.1D-2004 Rapid Spanning Tree Protocol (RSTP) IEEE 802.1Q VLAN Tagging and GVRP IEEE 802.1p Class of Service IEEE 802.3ad for Port Trunk with Link Aggregation and Control Protocol (LACP) IEEE 802.1X Port Based Network Access Control
- Flow Control IEEE 802.3x Flow Control and Back Pressure
Performance
- Switch Technology 32Gbps Switch Fabric
Store and Forward Switch Technology
- System Throughput 2.976Mbps with 64 Bytes packet
- Number of MAC Address 8K
- Packet Buffer Memory 1Mbits
- Transfer Packet Size 64 to 1552 Bytes (with VLAN Tag)
- Priority Queues per Port 4
- Port Trunk (Max) 5 Static Trunk
- VLAN (Max) 64
- DHCP Server Up to 255 IP Addresses
Management Features
- Configuration Command Line Interface (CLI) similar to Cisco, NetVision Utility, HTTP, HTTPS, SSH, TFTP/Web Update for firmware and configuration backup/restore, DHCP client, Warm reboot, Reset to default, Admin password, Port speed/Duplex Control, status, statistic, MAC Address table display, static MAC, Aging Time, SNMP V1/V2C/V3, Traps and RMON1
- SNMP MIB MIB-II, Bridge MIB, VLAN MIB, SNMP MIB, RMON, Private MIB
- Port Trunk Up to 5 Static Trunk and IEEE 802.3ad LACP
- VLAN IEEE 802.1Q VLAN, GVRP. Up to 64 VLAN Groups
- Quality of Service (QoS) Four Priority Queues/Port
IEEE 802.1 class of Service and Layer 3 TOS/DiffServ
- IGMP SnoopingIGMP Snooping V1/V2/V3 for multicast filtering
IGMP Query V1/V2
- Rate Control Ingress Filtering for Broadcast, Multicast, Unknown DA or all packets
Egress Filtering for all packets
- NTP Network Time Protocol to synchronize time from internet or local PC
- Embedded Watchdog Embedded hardware watchdog time auto reset system in case of a switch system failure
- Port Mirroring Online traffic monitoring on multiple selected ports
- Port Security Assign authorized MAC to specific port
- IP Security IP Security to prevent unauthorized access
- IEEE 802.1x IEEE 802.1x Port-Based Network Access Control
- DHCP Server Up to 255 IP Address. IP and MAC binding supported
- Email Warning Automatic warning by pre-defined events
- System Log Both local mode and server mode supported
Network Redundancy
- Rapid Spanning Tree Protocol (RSTP) IEEE 802.1D-2004 RSTP
Compatible with Legacy STP and IEEE 802.1w
- Rapid Ring Technology Failure recovery within less than 5ms
- Rapid Dual Homing (RDHTM) Multiple uplink paths to upper switches
- MultiRing Multiple Rapid Rings
- Port aggregation on Ring Port aggregation function on Ring path for more bandwidth and higher throughput
- Legacy Super Ring Backward compatible in client mode
Electrical Specifications
- Device
- DC Input Voltage 10 to 60VDC
- Current Consumption +24VDC 1A
- Power Consumption (max.) 24W
- Power Connector 1
- Power Connector Type 4-Pin Screw Terminal Block
- Power Input Redundancy Dual Redundant Independent Power Inputs
- Reverse Polarity Protection Yes
- Power Alarm Relay Alarm for power failure notification
- Relay Rating 1A Max. @ 24VDC
Environmental Specifications
- Air Temperature
- System On -40° to 74° C
- System Off -40° to 74° C
- Operating Humidity (non-condensing) 5% to 95%
- MTBF (Mean Time Between Failures) 34.6 years
Ethernet Specification
- Connector Type RJ45
- Number of Ports 10
- Ethernet Cable Type CAT-3, CAT-4, CAT-5, CAT-5e (UTP or STP)
- Standard for RJ45 Ports 10/100BASE-TX Auto MDI/MDIX
Auto negotiation
- Standard for Optional SFP 100BASE-FX Fast Ethernet Fiber
- Link Distance 100 Meters
- Port Alarm Relay Alarm Relay for Port Failure Notification
- Relay Rating 1A Max. @ 24VDC
Serial Console Port Specification
- Connector Type RJ45
- Number of Ports 1
- Serial Interface RS-232 (TXD, RXD, Signal GND)
- Baud Rate 9600bps
- Device Data Control
- Data Bits 8
- Parity None
- Stop Bits 1
- Flow Control None
Digital Input Specification
- Connector Type 4-Pin Screw Terminal Block
- Number of Inputs 2 Sets
- Voltage Levels
- Logic Low (0) 0 to 10VDC
- Logic High (1) 11 to 30VDC
Digital Output Specification
- Connector Type 4-Pin Screw Terminal Block
- Number of Outputs 2 Sets of Relay Outputs
- Output Relay Rating 1A Max. @ 24VDC
Export Information
- Packaged Shipping Weight 3.9 lbs
- Package Dimensions 11.3" x 5.5" x 9.1"
- UPC Code 9-56727-32062-3
- ECCN 5A991
- Schedule B Number 8517.62.0050
Regulatory Approvals
Box Contents
- RocketLinx ES8510-XTE Ethernet Switch Device
- Quick Installation Guide
- RJ45M-DB9M Cable
- Wall-Mount Plate
- Software/Documentation CD
|
|
|
|
|
|
|
|
|
|
|
|
|
Features
- Seven 10/100BASE-TX ports and three RJ45/SFP combo (10/100BASE-TX, 100BASE-FX)
- Enhanced redundancy featuring multiple redundant ring technology (recovery time <5ms)
- Non-blocking switching, 8K MAC address table, 32 Gbps switch fabric
- VLAN, GVRP, QoS, IGMP snooping V1/V2/V3, rate control, port trunking, LACP, online multi-port mirroring
- Management via console CLI, Web, SNMP V1/V2c/V3, RMON, HTTPS, SSH and NetVision
- Advanced security feature supports IP security, port security, DHCP server, IP and MAC binding, IEEE 802.1x network access control
- Event notification by email, SNMP trap, syslog, digital input and relay output
- Rigid aluminum IP31 housing, excellent heat dispersion, redundant power, DIN rail/wall-mount installation (bracket included)
- Extended operating temperature range (-40°C to +74°C)
- NEMA TS2 certified
|
|
|
|
|
|
|