 |
 |
 |
|
The RocketLinx MC7001 is an Ethernet to fiber media converter designed to excel in harsh industrial environments requiring a rugged, full-featured DIN rail mount converter in a small form factor IP31 housing. The RocketLinx MC7001 converts 10/100BASE-TX Ethernet to 100BASE-FX fiber with models available supporting Multi-Mode fiber connections.
Simple DIP switch configuration, low latency performance, a wide operating temperature range of -10° to 70°C, and advanced features including pure converter and switch modes combine to make the RocketLinx MC7001 a superior choice for applications requiring Ethernet to fiber conversion.
Hardware
- Bus Interface 10/100BASE-TX, 100BASE-FX
- Enclosure IP31 grade aluminum metal case
- Installation Method DIN Rail
- LED Indicators POWER, RJ45 Port Link/Activity, Fiber Port Link/Activity
- Dimensions 4.0" x 1.2" x 2.8"
- Product Weight 0.36 lb
Electrical Specifications
- Device
- DC Input Voltage 18 to 32VDC
- AC Input Voltage 18 to 27VAC, 47-63Hz
- Current Consumption +24VDC 145mA
- Power Consumption (max) 3.5W
- Power Connector Type (1) 2-Pin Screw Terminal Block
- Reverse Polarity Protection Protection Against Power Input Reversal
\
Environmental Specifications
- Air temperature
- System On -10 to 70°C
- System Off -40 to 80°C
- Operating Humidity (Non-Condensing) 0% to 95%
- Heat Output 11.9 BTU/Hr
- MTBF (Mean Time Between Failures) 57.9 Years
Ethernet Specifications
- Connector Type (1) RJ45
- Ethernet Cable Type CAT-3, CAT-4, CAT-5 (UTP or STP)
- Standard 10/100BASE-TX Auto MDI/MDI-X, Auto-Negotiation
- Link Distance 100 Meters
- Forwarding Modes
- Pure Converter Mode Directly transfers Ethernet packets without frame-checking
- Switch Transfer Mode Forwards Ethernet packets after received completely and after frame-checking. 64 to 1522 bytes supported.
- Link Loss Forward Link loss forward capable for fault detection
Optical Fiber Specifications
- Fiber Mode Multi-Mode
- Connector Type (2) Duplex SC
- Standard IEEE 802.3
100BASE-FX
- Fiber Cable Type 50/125um, 62.5/125um
- Link Distance (Max) 2KM
- Wave Length 1310nm
- Transmit Power (Min) -20 dBM
- Transmit Power (Max) -14 dBM
- Receive Sensitivity (Min) 0 dBM
- Receive Sensitivity (Max) -31 dBM
- Link Budget 11 dBM
- Supported Communication 100BASE-FX Full-Duplex or Half-Duplex
Export Information
- Packaged Shipping Weight 0.60 lb
- Package Dimensions 6.0" x 2.5" x 5.0"
- UPC Code 7-56727-32021-0
- Country of Origin Taiwan
- ECCN 5A991
- Schedule B Number 8517.62.0050
Regulatory Approvals
Box Contents
- RocketLinx MC7001 Multi-Mode Ethernet to Fiber Converter
- Quick Installation Guide
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Features
- One 10/100BASE-TX port to One 100BASE-FX port media converter
- Dual Forwarding modes -- Switching and Pure converter
- Supports 1.5KV Hi-Pot isolation protection
- Supports Auto MDI/MDIX, Auto-Negotiation
- Supports Multi-Mode 2KM
- Auto Link Loss Forwarding (LLF) for fault detection
- Extreme Low Data Forwarding Latency 1.6 x 10^-6 Sec
- Wide range DC or AC power input with DC polarity correction
- Compact aluminum case with IP31 grade protection
- -10° to 70°C operating temperature for hazardous environment applications
|
|
|
|
|
|
|